Published by mark itwired
Posted on August 10, 2021
Future Market Insights (FMI) has published a new market research report on rotomolded containers. The report has been titled “Rotomolded Containers Market: Global Industry Analysis 2012 – 2016 and Opportunity Assessment 2017 – 2027.” The report states that the growing demand from the food and beverages industry is expected to bode well for the growth of the global rotomolded containers market in the coming years. The growing demand from other end-use industries is also expected to boost the demand for rotomolded containers over the course of the forecast period. In order to cater to the growing need of both consumers and end users, manufacturers are focusing on research and development and are also investing heavily in order to stay ahead of the competition. The market is highly fragmented and the competition is also intense, thus compelling players to come up with new techniques pertaining to product differentiation.
For instance, in July 2016, RPC Group Plc. launched a new innovative pack solution with an injection molded screw lid. Then again, in August 2016, RPC Group Plc. acquired British Polythene Industries. Keeping the competition in mind, other companies such as Pelican Products, Inc., Snyder Industries Inc., Zero Manufacturing Inc., SKB Corporation, Inc., MODRoto, Inc., and Gemstar Manufacturing, among many others are also pulling up their socks. According to the report, the global market for rotomolded containers is expected to witness a CAGR of 4.8% from 2017 to 2027. The market was worth US$ 3,554.7 Mn in 2017 and is expected to rise to a valuation of US$ 5,676.4 Mn by the end of 2027
Request a Sample Report with Table of Contents and Figures: https://www.futuremarketinsights.com/reports/sample/rep-gb-4458
High Performance as Against Blow Molded Containers to Aid in Adoption
Rotational molded containers are far more superior in comparison to their blow molded counterparts. Rotational molding has witnessed significant growth in terms of evolution in the past few decades. The key driver of the growing preference for rotational molding is its inexpensive nature. Compared to blow molded containers, the production of rotomolded containers is comparatively cost effective. Employing the blow molding process for manufacturing containers incurs high cost due to the requirement of different chemicals. Hence, many manufacturers have made the switch from the blow molding process as the preferred mode of production to rotational molding. Besides, rotational molding enables the production of several parts as a single piece. In contrast, blow molding produces rather weak structures in its molds. Owing to the high demand for sturdy and safe containers, rotational molding is employed as the preferred method, as it makes use of heat instead of pressure unlike the blow molding process. The demand for rotomolded containers is anticipated to be driven mainly by the shifting preferences of consumers.
Moreover, customisation is expected to emerge as a key factor bolstering the growth of the market. Rotational molding is anticipated to witness high growth in adoption as the ideal production process for containers due to several reasons. As opposed to processes such as injection molding, in case of rotational molding, the material is not inoculated or forced to form a particular shape. This gives rise to opportunities for the production of containers in different styles and sizes. Rotational molding also supports a wide range of sizes, with precise surface detail, along with the use of different colours at different stages of the process. This leads to the implementation of aesthetic skills and the option to include the company’s logo on the surface of the container, without the risk of the branding peeling off.
For Information On The Research Approach Used In The Report, Ask Analyst @ https://www.futuremarketinsights.com/ask-question/rep-gb-4458
Extreme Competition from Advanced Technology to Hinder Market Growth
Cutting-edge technology such as 3-D printing has been foreseeing rapid penetration for the purpose of manufacturing complex parts. Although 3-D printing was initially conceptualised to help in the product development process, it has found a myriad of applications, thereby posing a threat to the adoption of rotational molding, injection molding, and blow molding processes.
More from FMI’s Cutting-edge Intelligence:
Future Market Insights (FMI) has published a new market research report on rotomolded containers. The report has been titled “Rotomolded Containers Market: Global Industry Analysis 2012 – 2016 and Opportunity Assessment 2017 – 2027.” The report states that the growing demand from the food and beverages industry is expected to bode well for the growth of the global rotomolded containers market in the coming years. The growing demand from other end-use industries is also expected to boost the demand for rotomolded containers over the course of the forecast period. In order to cater to the growing need of both consumers and end users, manufacturers are focusing on research and development and are also investing heavily in order to stay ahead of the competition. The market is highly fragmented and the competition is also intense, thus compelling players to come up with new techniques pertaining to product differentiation.
For instance, in July 2016, RPC Group Plc. launched a new innovative pack solution with an injection molded screw lid. Then again, in August 2016, RPC Group Plc. acquired British Polythene Industries. Keeping the competition in mind, other companies such as Pelican Products, Inc., Snyder Industries Inc., Zero Manufacturing Inc., SKB Corporation, Inc., MODRoto, Inc., and Gemstar Manufacturing, among many others are also pulling up their socks. According to the report, the global market for rotomolded containers is expected to witness a CAGR of 4.8% from 2017 to 2027. The market was worth US$ 3,554.7 Mn in 2017 and is expected to rise to a valuation of US$ 5,676.4 Mn by the end of 2027
Request a Sample Report with Table of Contents and Figures: https://www.futuremarketinsights.com/reports/sample/rep-gb-4458
High Performance as Against Blow Molded Containers to Aid in Adoption
Rotational molded containers are far more superior in comparison to their blow molded counterparts. Rotational molding has witnessed significant growth in terms of evolution in the past few decades. The key driver of the growing preference for rotational molding is its inexpensive nature. Compared to blow molded containers, the production of rotomolded containers is comparatively cost effective. Employing the blow molding process for manufacturing containers incurs high cost due to the requirement of different chemicals. Hence, many manufacturers have made the switch from the blow molding process as the preferred mode of production to rotational molding. Besides, rotational molding enables the production of several parts as a single piece. In contrast, blow molding produces rather weak structures in its molds. Owing to the high demand for sturdy and safe containers, rotational molding is employed as the preferred method, as it makes use of heat instead of pressure unlike the blow molding process. The demand for rotomolded containers is anticipated to be driven mainly by the shifting preferences of consumers.
Moreover, customisation is expected to emerge as a key factor bolstering the growth of the market. Rotational molding is anticipated to witness high growth in adoption as the ideal production process for containers due to several reasons. As opposed to processes such as injection molding, in case of rotational molding, the material is not inoculated or forced to form a particular shape. This gives rise to opportunities for the production of containers in different styles and sizes. Rotational molding also supports a wide range of sizes, with precise surface detail, along with the use of different colours at different stages of the process. This leads to the implementation of aesthetic skills and the option to include the company’s logo on the surface of the container, without the risk of the branding peeling off.
For Information On The Research Approach Used In The Report, Ask Analyst @ https://www.futuremarketinsights.com/ask-question/rep-gb-4458
Extreme Competition from Advanced Technology to Hinder Market Growth
Cutting-edge technology such as 3-D printing has been foreseeing rapid penetration for the purpose of manufacturing complex parts. Although 3-D printing was initially conceptualised to help in the product development process, it has found a myriad of applications, thereby posing a threat to the adoption of rotational molding, injection molding, and blow molding processes.
More from FMI’s Cutting-edge Intelligence:
Explore more articles in the Research Reports category
