Power Factor Correction Devices Market Overview

Power factor correction devices are also known as power saver devices. It is connected to the mains of the electrical system for improving the power factor measurement taken using an electricity meter. Power factor correction devices measure how efficiently power is consumed. However, the utility bill based on real power is not affected by power factor correction devices, but it is useful for industrial users where the power charges are based on PFC rather than real power.

Ideally, power factor will be unity (1 i.e. 100%), when the current and voltage simultaneously achieves maxima, but due to highly inductive load/devices in the real world it is reduced to 0.7 or less. The capacity of a circuit performance at a particular time is real power. It is observed that load/device with a low power factor takes more current than high-power factor devices in the electrical system for the same amount of power transferred. However, energy loss is also more in the distribution of higher current in the system. 

To remain ‘ahead’ of your competitors, request for a sample @ https://www.futuremarketinsights.com/reports/sample/rep-gb-3431

It also requires higher capacity wires and equipment. And due to the extra expenses and the wastage of current, power companies charge a higher cost to low power factor users, which are usually industrial and commercial customers. This is mainly caused by lightly loaded induction equipment; any device that has a coil of wire will create low power factor, such as Air Conditioners, pumps, fans or blowers, induction furnaces, weaving machines, standard stamping machines, single-stroke presses and automated machine tools. So, the power factor correction devices are used to raise the power factor of the respective devices and reduce the electricity bill.

Power Factor Correction Devices Market:Market Dynamics

Robust growth in HVAC systems across the world and increasing awareness among people to save electricity by connecting power factor correction devices to the electrical system lead to substantial increase in demand for power factor correction devices. Also, implementation of energy-efficiency norms and standards for the development of public lighting and power system is also expected to bolster the demand for power factor correction devices over the forecast period.

There are also certain risks associated with the installation of power factor correction devices. When power factor correction devices are connected to the system, they set up a parallel resonance circuit between their capacitors and the system network inductance. Sometimes, the wave components that are close to the parallel resonance are magnified and can cause serious problems such as excessive voltage distortion, insulation breakdown within motors, transformers and conductors and overvoltage tripping of drives . 

For More Information or Query or Customization Before Buying, Visit: https://www.futuremarketinsights.com/customization-available/rep-gb-3431

These risks can act as restraints to the power factor correction devices market. The presence of alternatives such as vacuum contactors can also hinder the growth of power factor correction devices market. Whereas, the growing tendency among people to save electricity by connecting power factor correction devices covers up these restraints to an extent.

Power Factor Correction Devices Market: Regional Outlook

Asia Pacific holds the major share of the global power factor correction devices market, followed by North America and Europe. Asia Pacific accounts for a significant share due to the substantial growth in electricity consuming sectors in this region. Rapid urbanization and industrialization in many major countries in the region such as China and India, is also expected to boost the market growth over the forecast period.

Power Factor Correction Devices Market: Market Participants

Some of the examples of market participants in the global power factor correction devices market, identified across the value chain are

• Siemens AG
• ABB
• Toshiba Corporation
• Schneider Electric
• Mitsubishi Electric Corporation
• LARSEN & TOUBRO LIMITED
• Eaton
• Cgglobal

The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to market segments such as geographies, application, and industry.

For Information On The Research Approach Used In The Report, Ask Analyst @ https://www.futuremarketinsights.com/askus/rep-gb-3431

The report covers exhaust analysis on:

• Market Segments
• Market Dynamics
• Market Size
• Supply & Demand
• Current Trends/Issues/Challenges
• Competition & Companies involved
• Technology
• Value Chain

Regional analysis includes:

• North America (U.S., Canada)
• Latin America (Mexico. Brazil)
• Western Europe (Germany, Italy, France, U.K, Spain)
• Eastern Europe (Poland, Russia)
• Asia Pacific (China, India, ASEAN, Australia & New Zealand)
• Japan
• Middle East and Africa (GCC Countries, S. Africa, Northern Africa)

The report is a compilation of first-hand information, qualitative and quantitative assessment by industry analysts, inputs from industry experts and industry participants across the value chain. The report provides in-depth analysis of parent market trends, macro-economic indicators and governing factors along with market attractiveness as per segments. The report also maps the qualitative impact of various market factors on market segments and geographies.

Power Factor Correction Devices Market:Market Segmentation

Segmentation of power factor correction devices market can be doneon the basis of end-use as follows;

• Automotive industries
• Consumer electronics
• Medical and healthcare industries
• Mining industries
• Electric Power industry.

Segmentation of power factor correction devices market can be doneon the basis of application as follows;

• Distributed power factor correction device
• Group power factor correction device
• Centralized power factor correction device
• Combined power factor correction device
• Automatic power factor correction device

Report Highlights:

• Detailed overview of parent market
• Changing market dynamics in the industry
• In-depth market segmentation
• Historical, current and projected market size in terms of volume and value
• Recent industry trends and developments
• Competitive landscape
• Strategies of key players and products offered
• Potential and niche segments, geographical regions exhibiting promising growth
• A neutral perspective on market performance
• Must-have information for market players to sustain and enhance their market footprint

Explore FMI’s Extensive Coverage on Industrial Automation Domain 

Stacker Truck Market : According to assessment, the Stacker Truck market is projected to witness growth over 6% to 8% CAGR during the assessment period of 2021 to 2031.

Grease Pump Market : Grease Pump Market By Product Type (Hand (Manual) Type, Pneumatic, Hydraulic, Electric Power), Pump Type (Centrifugal Pumps, Rotary Piston Pumps, Air Operated Diaphragm Pump, Peristaltic Pump) & Region – Forecast to 2021 – 2031

Robot Pedestal Market : According to latest research estimates, Robot Pedestal Market is set to witness healthy growth during 2021-2031 with a projected CAGR of 8-9%. Demand for Robot Pedestal will witness steady recovery in short-term, with optimistic growth outlook in the long-run.

About Future Market Insights (FMI) 

Future Market Insights (FMI) is a leading provider of market intelligence and consulting services, serving clients in over 150 countries. FMI is headquartered in Dubai, and has delivery centers in the UK, U.S. and India. FMI’s latest market research reports and industry analysis help businesses navigate challenges and make critical decisions with confidence and clarity amidst breakneck competition. 

Contact: 

Future Market Insights, 

1602-6 Jumeirah Bay X2 Tower, 

Plot No: JLT-PH2-X2A, 

Jumeirah Lakes Towers, Dubai, 

United Arab Emirates 

For Sales Enquiries: [email protected] 

For Media Enquiries: [email protected] 

Website: https://www.futuremarketinsights.com/ 

Report: https://www.futuremarketinsights.com/reports/power-factor-correction-devices-market

Power Factor Correction Devices Market Overview

Power factor correction devices are also known as power saver devices. It is connected to the mains of the electrical system for improving the power factor measurement taken using an electricity meter. Power factor correction devices measure how efficiently power is consumed. However, the utility bill based on real power is not affected by power factor correction devices, but it is useful for industrial users where the power charges are based on PFC rather than real power.

Ideally, power factor will be unity (1 i.e. 100%), when the current and voltage simultaneously achieves maxima, but due to highly inductive load/devices in the real world it is reduced to 0.7 or less. The capacity of a circuit performance at a particular time is real power. It is observed that load/device with a low power factor takes more current than high-power factor devices in the electrical system for the same amount of power transferred. However, energy loss is also more in the distribution of higher current in the system. 

To remain ‘ahead’ of your competitors, request for a sample @ https://www.futuremarketinsights.com/reports/sample/rep-gb-3431

It also requires higher capacity wires and equipment. And due to the extra expenses and the wastage of current, power companies charge a higher cost to low power factor users, which are usually industrial and commercial customers. This is mainly caused by lightly loaded induction equipment; any device that has a coil of wire will create low power factor, such as Air Conditioners, pumps, fans or blowers, induction furnaces, weaving machines, standard stamping machines, single-stroke presses and automated machine tools. So, the power factor correction devices are used to raise the power factor of the respective devices and reduce the electricity bill.

Power Factor Correction Devices Market:Market Dynamics

Robust growth in HVAC systems across the world and increasing awareness among people to save electricity by connecting power factor correction devices to the electrical system lead to substantial increase in demand for power factor correction devices. Also, implementation of energy-efficiency norms and standards for the development of public lighting and power system is also expected to bolster the demand for power factor correction devices over the forecast period.

There are also certain risks associated with the installation of power factor correction devices. When power factor correction devices are connected to the system, they set up a parallel resonance circuit between their capacitors and the system network inductance. Sometimes, the wave components that are close to the parallel resonance are magnified and can cause serious problems such as excessive voltage distortion, insulation breakdown within motors, transformers and conductors and overvoltage tripping of drives . 

For More Information or Query or Customization Before Buying, Visit: https://www.futuremarketinsights.com/customization-available/rep-gb-3431

These risks can act as restraints to the power factor correction devices market. The presence of alternatives such as vacuum contactors can also hinder the growth of power factor correction devices market. Whereas, the growing tendency among people to save electricity by connecting power factor correction devices covers up these restraints to an extent.

Power Factor Correction Devices Market: Regional Outlook

Asia Pacific holds the major share of the global power factor correction devices market, followed by North America and Europe. Asia Pacific accounts for a significant share due to the substantial growth in electricity consuming sectors in this region. Rapid urbanization and industrialization in many major countries in the region such as China and India, is also expected to boost the market growth over the forecast period.

Power Factor Correction Devices Market: Market Participants

Some of the examples of market participants in the global power factor correction devices market, identified across the value chain are

• Siemens AG
• ABB
• Toshiba Corporation
• Schneider Electric
• Mitsubishi Electric Corporation
• LARSEN & TOUBRO LIMITED
• Eaton
• Cgglobal

The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to market segments such as geographies, application, and industry.

For Information On The Research Approach Used In The Report, Ask Analyst @ https://www.futuremarketinsights.com/askus/rep-gb-3431

The report covers exhaust analysis on:

• Market Segments
• Market Dynamics
• Market Size
• Supply & Demand
• Current Trends/Issues/Challenges
• Competition & Companies involved
• Technology
• Value Chain

Regional analysis includes:

• North America (U.S., Canada)
• Latin America (Mexico. Brazil)
• Western Europe (Germany, Italy, France, U.K, Spain)
• Eastern Europe (Poland, Russia)
• Asia Pacific (China, India, ASEAN, Australia & New Zealand)
• Japan
• Middle East and Africa (GCC Countries, S. Africa, Northern Africa)

The report is a compilation of first-hand information, qualitative and quantitative assessment by industry analysts, inputs from industry experts and industry participants across the value chain. The report provides in-depth analysis of parent market trends, macro-economic indicators and governing factors along with market attractiveness as per segments. The report also maps the qualitative impact of various market factors on market segments and geographies.

Power Factor Correction Devices Market:Market Segmentation

Segmentation of power factor correction devices market can be doneon the basis of end-use as follows;

• Automotive industries
• Consumer electronics
• Medical and healthcare industries
• Mining industries
• Electric Power industry.

Segmentation of power factor correction devices market can be doneon the basis of application as follows;

• Distributed power factor correction device
• Group power factor correction device
• Centralized power factor correction device
• Combined power factor correction device
• Automatic power factor correction device

Report Highlights:

• Detailed overview of parent market
• Changing market dynamics in the industry
• In-depth market segmentation
• Historical, current and projected market size in terms of volume and value
• Recent industry trends and developments
• Competitive landscape
• Strategies of key players and products offered
• Potential and niche segments, geographical regions exhibiting promising growth
• A neutral perspective on market performance
• Must-have information for market players to sustain and enhance their market footprint

Explore FMI’s Extensive Coverage on Industrial Automation Domain 

Stacker Truck Market : According to assessment, the Stacker Truck market is projected to witness growth over 6% to 8% CAGR during the assessment period of 2021 to 2031.

Grease Pump Market : Grease Pump Market By Product Type (Hand (Manual) Type, Pneumatic, Hydraulic, Electric Power), Pump Type (Centrifugal Pumps, Rotary Piston Pumps, Air Operated Diaphragm Pump, Peristaltic Pump) & Region – Forecast to 2021 – 2031

Robot Pedestal Market : According to latest research estimates, Robot Pedestal Market is set to witness healthy growth during 2021-2031 with a projected CAGR of 8-9%. Demand for Robot Pedestal will witness steady recovery in short-term, with optimistic growth outlook in the long-run.

About Future Market Insights (FMI) 

Future Market Insights (FMI) is a leading provider of market intelligence and consulting services, serving clients in over 150 countries. FMI is headquartered in Dubai, and has delivery centers in the UK, U.S. and India. FMI’s latest market research reports and industry analysis help businesses navigate challenges and make critical decisions with confidence and clarity amidst breakneck competition. 

Contact: 

Future Market Insights, 

1602-6 Jumeirah Bay X2 Tower, 

Plot No: JLT-PH2-X2A, 

Jumeirah Lakes Towers, Dubai, 

United Arab Emirates 

For Sales Enquiries: [email protected] 

For Media Enquiries: [email protected] 

Website: https://www.futuremarketinsights.com/ 

Report: https://www.futuremarketinsights.com/reports/power-factor-correction-devices-market