MOBILE WORLD CONGRESS “ MaxLinear, Inc. (NYSE: MXL), a leading provider of radio frequency (RF), analog and mixed-signal integrated circuits for the connected home, wired and wireless infrastructure, and industrial and multimarket applications, today announced its next-generation MxL1500 and MxL1600 Quad-RF transceiver solutions for Radio Access Networks (RAN).
Based upon MaxLinears innovative RF architecture and CMOS process capabilities, the MxL1500 and MxL1600 are new industry-leading transceiver platforms that enable base station designers to simplify and accelerate their development of next-generation radios. As single-chip Quad-RF transceivers, MxL1500 and MxL1600 deliver the highest system integration, widest bandwidth, highest performance and broadest system flexibility on the market. Coupled with ultra-low power consumption, they are the new class-leaders in wireless infrastructure radios.
Key benefits of the MxL1500 and MxL1600 include:
- Highest system integration of 4 transmitters, 4 receivers and up to 2 feedback receivers in a single device
- Widest signal bandwidth of up to 400MHz, twice that of previous generation solutions
- Lowest power consumption, up to 50% lower than competitive offerings
- First single-chip Quad-RF transceivers to support all RAN air interface standards from 2G to 5G including MC-GSM
- First Quad-RF transceivers to support the new JESD204C system interface, enabling more efficient and lower cost system interconnect
The MxL1500 transceiver family is the industrys lowest power solution optimized for Massive Multiple-Input Multiple-Output (MIMO) active antenna system (AAS) applications. It supports 3G/4G/5G air interface performance for signal bandwidths up to 200MHz. The MxL1600 family further extends this performance to support air interfaces from 2G to 5G with signal bandwidths up to 400MHz, delivering the most highly integrated and lowest power solution for multi-band Multi-Standard Radios (MSR). The MxL1500 and MxL1600 transceiver families are pin and software compatible so product design teams can quickly and efficiently leverage their development investment across all their RAN product platforms.
Mobile network operators are eager to roll out new dense 4G and 5G radio networks that will efficiently deliver higher capacity through new technologies like MIMO, beamforming and multi-band, said Gerry Leavey, MaxLinear Director of Marketing, Wireless Infrastructure Group. In turn, wireless infrastructure vendors are challenged to supply highly integrated radio solutions for these new network deployments within key practical size, weight, power consumption and cost constraints. With the MxL1500 and MxL1600 Quad-RF families, MaxLinear has delivered a leadership transceiver portfolio that helps vendors rapidly and efficiently deliver cutting-edge AAS and multi-band multi-RAT macrocell radios within these constraints.
WANT TO BUILD A FINANCIAL EMPIRE?
Subscribe to the Global Banking & Finance Review Newsletter for FREE Get Access to Exclusive Reports to Save Time & Money
By using this form you agree with the storage and handling of your data by this website. We Will Not Spam, Rent, or Sell Your Information.
5G Massive MIMO radio systems stretch the limits of technical feasibility for semiconductor radio solutions. Compact, modular integration of 64 or more RF transceivers presents major system challenges and power efficiency becomes critical due to thermal performance requirements in the field, said Joe Madden, Founder and President, Mobile Experts Inc. Highly integrated transceiver solutions, such as the MxL1500 and MxL1600, are key to meeting the power consumption, size, performance and cost requirements of 5G Massive MIMO radios.
The MxL1500 and MxL1600 will be sampling to early-engagement customers in 2Q19. MaxLinear will be conducting briefings on its next-generation Wireless Access and Backhaul solutions at MaxLinears booth at Mobile World Congress, located in Fira Gran Via Hall 2, Stand A64MR from February 22-28, 2019. For an appointment, please contact [email protected].
About MaxLinear, Inc.
MaxLinear, Inc. (NYSE:MXL) is a leading provider of radio frequency (RF), analog and mixed-signal integrated circuits for the connected home, wired and wireless infrastructure, and industrial and multimarket applications. MaxLinear is headquartered in Carlsbad, California. For more information, please visit www.maxlinear.com.
MxL and the MaxLinear logo are trademarks of MaxLinear, Inc. Other trademarks appearing herein are the property of their respective owners.
Cautionary Note About Forward-Looking Statements
This press release contains forward-looking statements within the meaning of federal securities laws. Forward-looking statements include, among others, statements concerning or implying future financial performance, anticipated product performance and functionality, or trends and growth opportunities affecting MaxLinear, in particular statements relating to MaxLinears announcement of the launch of MxL1500 and MxL1600, including but not limited to potential market opportunities, functionality, and the benefits of use of MxL1500 and MxL1600. These forward-looking statements involve known and unknown risks, uncertainties, and other factors that may cause actual results to differ materially from any future results expressed or implied by these forward-looking statements. We cannot predict whether or to what extent the availability of MxL1500 and MxL1600 will affect our future revenues or financial performance. Forward-looking statements are based on managements current, preliminary expectations and are subject to various risks and uncertainties that could cause actual results to differ materially from those described in the forward-looking statements. Forward-looking statements may contain words such as will be, will, expected, anticipate, continue, or similar expressions and include the assumptions that underlie such statements. The following factors, among others, could cause actual results to differ materially from those described in the forward-looking statements: intense competition in our industry and product markets; risks relating to the development, testing, and commercial introduction of new products and product functionalities; the ability of our customers to cancel or reduce orders; uncertainties concerning how end user markets for our products will develop; our lack of long-term supply contracts and dependence on limited sources of supply; potential decreases in average selling prices for our products; and the potential for intellectual property litigation, which is prevalent in our industry. In addition to these risks and uncertainties, investors should review the risks and uncertainties contained in MaxLinears filings with the United States Securities and Exchange Commission, including risks and uncertainties identified in our Annual Report on Form 10-K for the year ended December 31, 2018. All forward-looking statements are qualified in their entirety by this cautionary statement. MaxLinear is providing this information as of the date of this release and does not undertake any obligation to update any forward-looking statements contained in this release as a result of new information, future events, or otherwise.
MaxLinear, Inc. Press Contact:
Marketing Communications Manager
Tel: +1 669-265-6083
MaxLinear, Inc. Corporate Contact:
Wireless Infrastructure Group